|
Steinel Nozzles for
Electronic Heat Guns
HG-2510ESD - HG2310LCD
- HL2010E - HL1910E -
HL1810S -
HL1610S - HG3002LCD
More heat guns -
Heat gun Applications |
|
Part # 07301 $20.79
75mm (3") reflector nozzle with a 1-1/2" reflector for large diameter
shrink tube applications. The reflector can be adjusted to efficiently
shrink small diameter tubing . |
Enlarge Image |
|
|
Part #07051
$14.79
39mm reflector nozzle with a 1-1/2 reflector for medium diameter
shrink tube applications. The reflector can be adjusted for smaller diameter
tubing. |
Enlarge Image |
|
|
Part #07461
$16.99
14mm (5/8") reflector nozzle with a specially designed tip to provide
efficient and quick heat to solder sink wire connectors. This is a totally
enclosed nozzle with no vents for deflecting excess hot air into the working
area. |
Enlarge Image |
|
|
Part #07061
$24.99
9mm (3/8") reflector nozzle with a 1-1/2" reflector that can be easily
formed for shrinking small diameter tubing. This is a totally enclosed
nozzle with no vents for deflecting excess hot air into the working area.
The reflector is removable to allow application of direct pin point heat to
a surface. |
Enlarge Image |
|
|
Reduction
Nozzle
Part #
07062 - (3/8") 9mm $14.79
Provides a totally concentrated pin point air flow. |
Enlarge Image |
|
|
Reduction
Nozzle
Part #
07071 - (5/8") 14mm $14.79
Provides a totally concentrated pin point air flow. |
Enlarge Image |
|
|
Reduction
Nozzle
Part #
07081 - (3/4") 20mm $14.79
Provides a totally concentrated pin point air flow. |
Enlarge Image |
|
|
Wide-Jet Nozzles
Spreads hot air over a wider area for drying, shaping plastic, heating
large surfaces, etc.
Part # 07011 $14.79
50mm Surface Nozzle
Part # 07021 $14.79
75mm Surface Nozzle |
Enlarge
Image |
|
|
40 mm (1"-1/2" Slit Nozzle)
Part # 07471 $24.99
For lap welding PVC sheeting and roofing material. To be used with
Item 07071. |
Enlarge Image |
|
|
75 mm (3") Heat Disc
Part # 07211 $26.11
Teflon coated disc for heating PVC pipe for butt welding. To be used with
Item 07071. |
Enlarge Image |
|
|
20 mm (3/4") Slit Nozzle
Part # 07101 $14.79
For lap welding plastic materials. To be used with Item 07062. |
Enlarge Image |
|
|
Plastic Weld Nozzle
Part # 07091 $19.49
For working with flexible plastic welding wire. To be used with Item
07062. |
Enlarge Image |
|
|
Deflector Nozzles
Protects adjoining surfaces from overheating, such as panes of glass and
corners.
Part # 07031 $14.79
50mm Window Nozzle
Part # 07041 $14.79
75mm Window Nozzle |
Enlarge Image |
|
|
40mm Angle Slit Nozzle
Used for welding single ply roofing materials and plastic sheets.
Part
# 07511 $51.99
|
Enlarge Image |
|
|
Wire Protection Tube
Prevents accidental contact with hot nozzles.
Part # 07403
$16.99
|
Enlarge Image |
|
|
Silicone Seam Roller
Part# 01250
$20.99
1 ¾” wide head with ball bearings.
|
Enlarge Image |
|
|
5Pc Paint Scraper Set
Part# 01031 $19.95
3 different interchangeable scraper attachments.
|
 |
|
|
Stand
Part# 01410
$37.99
Stand can be used along with 3" reflector to apply a warm air bath to
the bottom of the PCB. Chip Quik Alloy can
then be used for very low temperature removal of SMD's. Board preheating can also
be applied when replacing SMD's.
|
Enlarge Image |
|
|
Flexible Stand with Magnetic Base
Magnetic base keeps stand in place while working. Flexible arm allows
user to adjust gun to the optimal working position.
Part # 01400
$31.99
|
Enlarge Image |
|
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
HDPE Plastic Welding
Rods
Part # 07121 $8.59
|
Enlarge Image |
|
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
Rigid PVC Welding Rods
Part # 07311 $8.59
|
Enlarge Image |
|
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
LDPE Plastic Welding Rods
Part # 07331 $8.59
|
Enlarge Image |
|
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
PP Plastic Welding Rods
Part # 07341 $8.59
|
Enlarge Image |
|
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
ABS Plastic Welding Rods
Part # 07421 $8.59
|
Enlarge Image |
|
|
Heavy-Duty Carry Case
Blow Molded for Maximum Durability
Part # 40100 $40.99
(Fits HG 2510 ESD, HG 2310 LCD, HL 2010 E, HL 1910 E, HL 1810 E, and HL 1610
E)
|
Enlarge Image |
